Surface Pump

As a USA based peripheral pump manufacturer and supplier, Vossche offers a comprehensive range of products that includes sewage pump, centrifugal pump, submersible pump, small integrated pump unit, and much more.

Related Names: Vortex Pump | Helical Flow Pump | Regenerative Pump | Volute Pump

QB Peripheral Pump

QB peripheral pump is mainly composed of motor, water pump and sealing parts. The motor is single phase asynchronous type, and the brass impeller has peripheral structure. The single mechanical seal using ceramic/graphite/nitrile butadiene rubber works as the motive seal, and oil resistant rubber ring is used as the static seal for rabbet.

SQm Peripheral Water Pump

SQm peripheral water pump differs from QB series in the water inlet, left side for SQm series and front side for QB series. The other configurations and performances are the same for these two series.

WZB Self-Priming Peripheral Pump

WZB self-priming peripheral pump mainly contains three parts, motor, water pump and sealing parts. The motor is single phase asynchronous type, and the brass impeller is peripheral. The single mechanical seal for motive seal adopts SiC/graphite/nitrile butadiene rubber, and oil resisting rubber ring is used as the static seal for rabbet.

AWZB Automatic Self-Priming Peripheral Pump

AWZB automatic self-priming peripheral pump is suitable for clear water and non-aggressive liquids without sand or other solid impurities. Our product is able to supply water at stable pressure, and it is controlled according to the water pressure. It has some excellent features, such as small size, light weight, compact structure, easy installation, low power, big suction height, etc.

AWZB-K Automatic Peripheral Self Priming Pump

The control system is used to achieve the automatic running according to the water pressure, and the start and stop of our machine is controlled by the valve. The electronic pressure switch applied is adjustable and visible which means that the start and stop pressures can be adjusted depending on the actual working pressure.

AWZB-AK Automatic Peripheral Self Priming Pump

AWZB-AK automatic peripheral self priming pump contains four parts including motor, water pump, sealing part and control system. It adopts asynchronous motor and peripheral impeller, and the control system realizes the automatic working of our product. Depending on the water pressure, the valve will be open under some conditions, and the machine will automatically work.

AWZB-A Automatic Peripheral Self Priming Pump

AWZB-A automatic peripheral self priming pump is composed of motor, water pump, sealing part and control system. It is equipped with mechanical pressure switch, and the 8L/19L pressure tank guarantees better buffering property as well as more stable working. Based on the water pressure, the control system is able to realize the automatic running of our product.

CP(m) Centrifugal Pump

CP(m) centrifugal pump uses cast iron to produce pump body and motor bracket, and the impeller is made of brass which makes it very durable. The shaft with rotor takes stainless steel or CS45# as the raw material, and the mechanical seal is made of ceramic-graphite. In addition, copper winding is also applied.

SHFm Centrifugal Pump

SHFm centrifugal pump is mainly used for circulation system, farm irrigation and other conditions. Its body and motor bracket are made of cast iron, and the impeller is made of brass or cast iron. The raw material for mechanical seal is ceramic-graphite, and the shaft of rotor is manufactured using stainless steel or CS45#. The copper winding is also used.

SGT Centrifugal Pump

SGT centrifugal pump uses cast iron to produce pump body and impeller, and the motor bracket is made of HT200/cast iron. The motor shaft is made of SS304 and CS45# while the raw material for mechanical seal is silicon carbide-graphite, and copper winding is also used.

2SGP(m) Centrifugal Pump

This product is 2-pole type, and the two impellers are set back-to-back which greatly reduces the axial force generated by the impellers. The reasonable structure makes it more efficient when compared with similar product, and the running is more stable with less noise. Meanwhile, the high quality seal guarantees little leakage and long service life.

JET Self-Priming Jet Pump

JET self-priming jet pump is mainly composed of three parts, motor, water pump and sealing parts. The motor is single phase asynchronous type with built-in thermal protection device, and the water pump has a combined structure of centrifugal impeller, radial diffuser as well as ejector.

JET-GB Self Priming Jet Pump

JET-GB self priming jet pump contains three major parts, motor, water pump, and sealing parts. The motor is asynchronous type, and the water pump has a unique structure of centrifugal impeller, radial diffuser and jet pipe. The pressurized water flows through jet nozzle to form vacuum atmosphere, and liquid in low water level is sucked into our product, then pressurized and drained.

SGJS Self Priming Jet Pump

SGJS self priming jet pump has high head, and it is suitable for clean water without abrasive particles. This product is applicable for water lifting, domestic use, irrigation for garden and farmland, water distribution with small or medium pressure sets, etc. In addition, it should be installed in enclosed place, otherwise, it should be protected against harsh weather at least.

SGJW Self Priming Jet Pump

SGJW self-priming jet pump is applicable for water lifting, household application, irrigation for garden and farmland, water distribution with small or medium pressure sets, etc. This product should be installed in enclosed place, and if there is a problem doing so, it should be protected against severe weather at least. The lift height is quite high, and clean water without abrasive particles is applicable.